Swift   发布时间:2022-03-31  发布网站:大佬教程  code.js-code.com
大佬教程收集整理的这篇文章主要介绍了[Swift]LeetCode468. 验证IP地址 | Validate IP Address大佬教程大佬觉得挺不错的,现在分享给大家,也给大家做个参考。

概述

Write a function to check whether an input String is a valid IPv4 address or IPv6 address or neither. IPv4 addresses are canonically represented in dot-decimal notation, which consists of four decimal@H_673_5@

Write a function to check whether an input String is a valid IPv4 address or IPv6 address or neither.

IPv4 addresses are canonically represented in dot-decimal notation,which consists of four decimal numbers,each ranging from 0 to 255,separated by dots ("."),e.g.,172.16.254.1;

Besides,leading zeros in the IPv4 is invalid. For example,the address 172.16.254.01 is invalid.

IPv6 addresses are represented as eight groups of four hexadecimal digits,each group represenTing 16 bits. The groups are separated by colons (":"). For example,the address 2001:0db8:85a3:0000:0000:8a2e:0370:7334 is a valid one. Also,we Could omit some leading zeros among four hexadecimal digits and some low-case characters in the address to upper-case ones,so 2001:db8:85a3:0:0:8A2E:0370:7334 is also a valid IPv6 address(Omit leading zeros and using upper cases).

However,we don‘t replace a consecutive group of zero value with a single empty group using two consecutive colons (::) to pursue simplicity. For example, 2001:0db8:85a3::8A2E:0370:7334 is an invalid IPv6 address.

Besides,extra leading zeros in the IPv6 is also invalid. For example,the address 02001:0db8:85a3:0000:0000:8a2e:0370:7334 is invalid.

Note: You may assume there is no extra space or special characters in the input String.

Example 1:

Input: "172.16.254.1"

Output: "IPv4"

Explanation: This is a valid IPv4 address,return "IPv4". 

Example 2:

Input: "2001:0db8:85a3:0:0:8A2E:0370:7334"

Output: "IPv6"

Explanation: This is a valid IPv6 address,return "IPv6". 

Example 3:

Input: "256.256.256.256"

Output: "Neither"

Explanation: This is neither a IPv4 address nor a IPv6 address.

编写一个函数来验证输入的字符串是否是有效的 IPv4 或 IPv6 地址。

IPv4 地址由十进制数和点来表示,每个地址包含4个十进制数,其范围为 0 - 255, 用(".")分割。比如,172.16.254.1

同时,IPv4 地址内的数不会以 0 开头。比如,地址 172.16.254.01 是不合法的。

IPv6 地址由8组16进制的数字来表示,每组表示 16 比特。这些组数字通过 (":")分割。比如,  2001:0db8:85a3:0000:0000:8a2e:0370:7334 是一个有效的地址。而且,我们可以加入一些以 0 开头的数字,字母可以使用大写,也可以是小写。所以, 2001:db8:85a3:0:0:8A2E:0370:7334 也是一个有效的 IPv6 address地址 (即,忽略 0 开头,忽略大小写)。

然而,我们不能因为某个组的值为 0,而使用一个空的组,以至于出现 (::) 的情况。 比如, 2001:0db8:85a3::8A2E:0370:7334是无效的 IPv6 地址。

同时,在 IPv6 地址中,多余的 0 也是不被允许的。比如, 02001:0db8:85a3:0000:0000:8a2e:0370:7334 是无效的。

说明: 你可以认为给定的字符串里没有空格或者其他特殊字符。

示例 1:

输入: "172.16.254.1"

输出: "IPv4"

解释: 这是一个有效的 IPv4 地址,所以返回 "IPv4"。

示例 2:

输入: "2001:0db8:85a3:0:0:8A2E:0370:7334"

输出: "IPv6"

解释: 这是一个有效的 IPv6 地址,所以返回 "IPv6"。

示例 3:

输入: "256.256.256.256"

输出: "Neither"

解释: 这个地址既不是 IPv4 也不是 IPv6 地址。
12ms
 1 class Solution {
 2     func validIpaddress(_ IP: String) -> String {
 3         if isValidIPv4(Ip) {return "IPv4"}
 4         else if isValidIPv6(Ip) {return "IPv6"}
 5         else 
 6         {
 7             return "Neither"
 8         }
 9     }
10     
11     func isValidIPv4(_ ip:string) -> Bool
12     {
13         if ip.count < 7 {return false}
14         if ip[0] == "." {return false}
15         if ip[ip.count-1] == "." {return false}
16         var tokens:[String] = ip.components(separatedBy:".")
17         if tokens.count != 4  {return false}
18         for token in tokens
19         {
20             if !isValidIPv4Token(token) {return false}
21         }
22         return true
23     }
24     
25     func isValidIPv4Token(_ token:string) -> Bool
26     {
27         if token.hasPrefix("0") && token.count > 1 {return false}
28         
29         if let parsedInt = Int(token)
30         {
31             if parsedInt < 0 || parsedInt > 255 {return false}
32             if parsedInt==0 && token[0] != "0" {return false}
33             return true            
34         }
35         else
36         {
37             return false
38         }       
39     }
40     
41     func isValidIPv6(_ ip:string) -> Bool
42     {
43         if ip.count < 15 {return false}
44         if ip[0] == ":" {return false}
45         if ip[ip.count-1] == ":" {return false}
46         var tokens:[String] = ip.components(separatedBy:":")
47         if tokens.count != 8  {return false}
48         for token in tokens
49         {
50             if !isValidIPv6Token(token) {return false}
51         }
52         return true
53     }
54     
55         func isValidIPv6Token(_ token:string) -> Bool
56     {
57         if token.count == 0 || token.count > 4 {return false}
58         for c in token.characters
59         {
60             var isDigit:Bool = c.ascii >= 48 && c.ascii <= 57
61             var isUppercaseAF:Bool = c.ascii >= 65 && c.ascii <= 70
62             var isLowerCaseAF:Bool = c.ascii >= 97 && c.ascii <= 102
63             if !(isDigit || isUppercaseAF || isLowerCaseAF)
64             {
65                 return false
66             }
67         }
68         return true
69     }
70 }
71 
72 extension String {        
73     //subscript函数可以检索数组中的值
74     //直接按照索引方式截取指定索引的字符
75     subscript (_ i: int) -> Character {
76         //读取字符
77         get {return self[index(starTindex,offsetBy: i)]}
78     }
79 }
80 
81 extension Character  
82 {  
83   //属性:ASCII整数值(定义小写为整数值)
84    var ascii: Int {
85         get {
86             let s = String(self).unicodeScalars
87             return Int(s[s.starTindex].value)
88         }
89     }
90 }

12ms

 1 class Solution {
 2     func validIpaddress(_ IP: String) -> String {
 3         
 4         let ipv4 = IP.components(separatedBy: ".")
 5         
 6         if ipv4.count == 4 {
 7             
 8             return validIPv4adress(ipv4)
 9         }
10         
11         let ipv6 = IP.components(separatedBy: ":")
12         
13         if ipv6.count == 8 {
14             
15             return validIPv6adress(ipv6)
16         }
17         
18         return "Neither"
19     }
20     
21     /// IP v4 检验
22     private func validIPv4adress(_ ips: [String]) -> String{
23         
24         for ip in ips {
25             
26             if !ip.isValidIPv4() {
27                 return "Neither"
28             }
29         }
30         
31         return "IPv4"
32     }
33     
34     
35     /// IP v6 检验
36     private func validIPv6adress(_ ips: [String]) -> String{
37         
38         for ip in ips {
39             
40             if !ip.isValidIPv6() {
41                 return "Neither"
42             }
43         }
44         
45         return "IPv6"
46     }
47 }
48 
49 extension String{
50     
51     func isValidIPv4() -> Bool{
52         
53         /// 不可前缀 0
54         if self.count > 1 && self.hasPrefix("0") { return false }
55         
56         guard let ip = UInt(self) else { return false }
57         
58         if ip == 0 && self.contains("-") { return false }
59         
60         return ip <= 255
61     }
62     
63     func isValidIPv6() -> Bool{
64         
65         if self.count > 4 { return false }
66         
67         guard let ip = UInt(self,radix: 16) else { return false }
68         
69         if ip == 0 && self.contains("-") { return false }
70         
71         return true
72     }
73 }

大佬总结

以上是大佬教程为你收集整理的[Swift]LeetCode468. 验证IP地址 | Validate IP Address全部内容,希望文章能够帮你解决[Swift]LeetCode468. 验证IP地址 | Validate IP Address所遇到的程序开发问题。

如果觉得大佬教程网站内容还不错,欢迎将大佬教程推荐给程序员好友。

本图文内容来源于网友网络收集整理提供,作为学习参考使用,版权属于原作者。
如您有任何意见或建议可联系处理。小编QQ:384754419,请注明来意。