大佬教程收集整理的这篇文章主要介绍了CentOS 6.x 7.x中用rsync远程同步文件,大佬教程大佬觉得挺不错的,现在分享给大家,也给大家做个参考。
CentOS 6.x中用rsync远程同步文件
系统环境:Centos 6.9x64 (Centos 7.3 x64)
目的:
服务器110.112.200.12中/u01文件夹需要同步复制到110.210.250.58里面进行备份。
将200.12做xinetd 服务器,将其/u01 文件夹复制同步到250.58里面去,250.58做客户端。
一、服务器端的配置
Centos 6.9 x64
在源服务器110.112.200.12中配置
[root@mail test]# yum -y install xinetd rsync
再修改配置: # vi /etc/xinetd.d/rsync
service rsync
disable = NO
socket_type = stream
wait = no
user = root
server = /usr/bin/rsync
server_args = --daemon
log_on_failure += USERID
}
把原来的disable ,由YES改成NO
[root@mail test]# vi /etc/rsyncd.conf
uid = root
gid = root
use chroot = no
@H_945_87@max connections = 20
secrets file = /etc/rsync_pass
pid file = /var/run/rsyncd.pid
log file = /var/log/rsyncd.log
[BACkup]
path = /u01
comment = Rsync share test
auth users = ruser
read only = yes
hosts allow = 110.210.250.58
hosts deny = *
注意,path = /u01 ;表示要备份的文件夹为/u01
配置同步的帐号、密码
[root@mail test]# vi /etc/rsync_pass
ruser:123456
[root@mail test]# chown root:root /etc/rsync_pass
[root@mail test]# chmod 600 /etc/rsync_pass
[root@mail test]# chkconfig xinetd on
[root@mail test]# service xinetd restart
检查是否出现873端口
[root@mail test]#netstat -natp
tcp 0 0 0.0.0.0:873 0.0.0.0:* LISTEN 20959/xinetd
注意:如果服务器上装有防火墙记得要打开端口,默认端口是873
另外一种启动、停止方法(不建议使用)
有些人喜欢用命令rsync --daemon --config=/etc/rsyncd.conf 来启动rsync,停用它时要用pkill命令来杀掉进程,不如用xinetd来管理启动rsync方便。
再有些人喜欢写个脚本来启动、停止rsync,系统本身有xinetd来管理启动rsync而不用它,有点舍近求远的味道。
[root@mail test]# rsync --daemon --config=/etc/rsyncd.conf
[root@mail test]# pgrep -l rsync
5132 rsync
[root@mail test]#pkill rsync
[root@mail test]# pgrep -l rsync
------------------------------------------------------------------------------------------
如果你是用Centos 7.3 x64做服务端,请看下面的配置
[root@mail test]# rpm -qa|grep rsync
rsync-3.0.9-17.el7.x86_64
4、配置rsync的配置文件
vi /etc/rsyncd.conf
port = 873
timeout = 200
lock file = /var/run/rsyncd.lock
log format = %t %a %m %f %b
list = yes
hosts allow = 110.210.250.58
hosts deny = *
[root@mail test]# yum install xinetd.x86_64
[root@mail test]#rpm -qa xinetd
xinetd-2.3.15-13.el7.x86_64
再修改配置: #vi /etc/xinetd.d/rsync
service rsync
disable = NO
socket_type = stream
wait = no
user = root
server = /usr/bin/rsync
server_args = --daemon
log_on_failure += USERID
}
把原来的disable ,由YES改成NO
安装完成后,将xinetd服务加入开机自启动:
[root@mail test]# systemctl enable xinetd.service
最后,重新启动服务即可:
[root@mail test]# systemctl restart xinetd
检查是否出现873端口
[root@mail test]# tcP6 0 0 :::873 :::* LISTEN 25167/xinetd
加入防火墙允许 [root@mail test]#firewall-cmd --add-service=rsyncd --peRMANent [root@mail test]#firewall-cmd --reload [root@mail test]#systemctl restart firewalld 二、客户端的配置 在目标服务器250.58中配置 [root@vmevan test]# yum -y install rsync [root@vmevan test]# 123456
[root@vmevan test]# chmod 600 /etc/rsync_pass [root@vmevan test]# @H_763_66@mkdir /bakcup200.12 在客户端中,有些文件(如named.run)不需要同步,所以要添加到排除列表exclude.list中去。 [root@vmevan test]#vi /etc/exclude.list named.run @H_801_638@[root@vmevan test]#chmod 600 /etc/exclude.list [root@vmevan test]#vi /usr/sbin/rsyncdns #!/bin/bash # by evan.li 2017.6.21 rsync -vzrtopgu --progress --delete --exclude-from="/etc/exclude.list" --password-file=/etc/rsync_pass ruser@110.112.200.12::BACkup /bakcup200.12 [root@vmevan test]#chmod +x /usr/sbin/rsyncdns 每1小时同步 [root@vmevan test]#vi /etc/crontab 0 */1 * * * root /usr/sbin/rsyncdns 1、在客户端中,设定异地主机之间的同步 [root@vmevan test]# rsync -vzrtopgu --progress --delete --password-file=/etc/rsync_pass ruser@110.112.200.12::BACkup /bakcup200.12 或者用 [root@vmevan test]# rsync -zrtopgu --delete --password-file=/etc/rsync_pass ruser@110.112.200.12::BACkup /bakcup200.12 这个命令行中-vzrtopg里的v是verbose,详细的。 z是压缩传输, r是recursive,递归。 u是只同步已经更新的文件,避免没有更新的文件被重复更新一次,不过要注意两者机器的时钟的同步。 �Cprogress是指显示出详细的进度情况, �Cdelete是指如果服务器端删除了这一文件,那么客户端也相应把文件删除,保持真正的一致。 后 面的ruser@110.112.200.12::BACkup中,之后的BACkup是模块名, 也就是在/etc/rsyncd.conf中自定义的名称, ruser是指定模块中指定的可以同步的用户名。 最后的/bakcup200.12是备份到本地的目录名。 在这里面,还可以用-e ssh的参数建立起加密的连接。 可以用�Cpassword-file=/password/path/file来指定密码文件,这样就可以在脚本中使用而无需交互式地输入验证密码了,这里需要注意的是这份密码文件权限属性要设得只有属主可读。 在客户端中,将rsync放入crontab计划任务,每天早上5点同步一次 [root@vmevan test]# 0 5 * * * root /usr/bin/rsync -vzrtopgu --delete --password-file=/etc/rsync_pass ruser@114.112.200.12::BACkup /bakcup200.12
50 6 * * * root /usr/bin/rsync -avu �Cprogress �Cdelete /u01 /u03/BACkup 2、在服务端(源服务器中)中, 能建立本地目录之间的同步 [root@vmevan test]# rsync -avu -progress -delete /u01/555 /mnt/sdb1/u01 将源目录/u01/555,同步放到/mnt/sdb1/u01文件夹下。对src-dir目录内容向dst-dir目录下进行差异更新,有增加/更新则添加替换,有减少则对其删减 。 测试完成于2017.06.21 by evan.li
-------------------------------------------------------------------------------------------
以上是大佬教程为你收集整理的CentOS 6.x 7.x中用rsync远程同步文件全部内容,希望文章能够帮你解决CentOS 6.x 7.x中用rsync远程同步文件所遇到的程序开发问题。
如果觉得大佬教程网站内容还不错,欢迎将大佬教程推荐给程序员好友。
本图文内容来源于网友网络收集整理提供,作为学习参考使用,版权属于原作者。
如您有任何意见或建议可联系处理。小编QQ:384754419,请注明来意。